Welcome to Xuzhou Sida new Technology development Co., LTD

服务热线:0516-87730786

通用banner
Your current location: Home >> News >> trade news

ContactContact Us

C

Xuzhou Sida New Technology Development Co., Ltd

Tel: 13615109777 (manager Li)

Fax: 0516-85851928

Email: LHW9777@126.  com

Website:  en.xzsdx.com

Address: No. 26, Jinqiao Road, Xuzhou Economic Development Zone, Jiangsu Province

What is the disassembly and assembly process of the instrument panel?

2021-12-14 09:50:18
47a

What is the disassembly and assembly process of the instrument panel? Follow the manufacturer of multi-function instrument panel to have a look.
(1) Remove the instrument panel internal storage box
1) Remove the instrument panel storage box base plate.
2) Remove the screws and pry the hook with a suitable finishing tool to open the cover.
3) Turn the inner box cover upward at the upper hook to disengage the lower hook, and then remove the instrument panel storage box.
4) Remove the side fuse / relay box.
(2) Remove relevant components on the driver's side
1) Loosen the steering wheel tilt / telescopic lock lever and adjust the steering column upward. Keep the locking lever loose.
2) Remove the screws, pull out the bottom lower guard, and then remove the lower cover of the instrument panel on the driving side and other decorative parts.
(3) Remove the center armrest box
1) Pull up the shift lever middle trim to disengage the clip and release the hook, and then remove the trim.
2) Loosen the side ribs of the center armrest box and remove the center armrest box.


仪表台设备


(4) Remove relevant components of the central control panel
Pull out the central control panel by hand to release the clip, disconnect the plugs of hazard warning lamp switch, air outlet switch, etc., and then remove the central control panel.
(5) Remove the instrument panel
First, remove the switch from the instrument panel. Then, remove the fastening bolts of the instrument panel to remove the instrument panel. Remove the DVD navigation system from the centre of the instrument panel.
(6) Lift down the instrument panel
Remove the fastening bolts at the left, right and bottom of the instrument panel, and carefully lift the instrument panel assembly from the vehicle.
(7) Install the instrument panel
Install the instrument panel in the reverse order of removal, noting the following:
1) Ensure that each plug is inserted correctly.
2) If the clip is damaged or damaged due to heavy pressure, replace it with a new clip.
3) Push the clip and hook to secure them in place.
4) Ensure that the ribs of the driver's side panel and the passenger's side panel are securely connected to the instrument panel storage box.
5) Tighten the instrument panel bolts to the specified torque.
6) After installation, clear the fault code.
Next up: None
©2021 copyright:Xuzhou Sida New Technology Development Co., Ltd Record number:苏ICP备2021047711号 技术支持:苏视在线